>>Back to product page

Remote-Video Monitoring System


The Remote-Video Monitoring System adds video monitoring and remote-access capability to message signs.The system allows remote control of both the camera and the sign.
Monitor traffic, change the message, and control the day/night pan-tilt-zoom camera using your PC’s browser.


Camera system
Camera model*Vicon® Surveyor or Pelco® Spectra IV

Camera type:
Clear-domed day/night, pan-tilt-zoom (PTZ)

Optical zoom:
23X standard, 35X optional

JPEG and MPEG-4 streams

Network security:
Multiple user-access levels, IP address filtering, HTTPS encryption, IEEE 802.1X authentication



High-speed 3G cellular router, accessible only via TCP/IP Internet access (no local access)

Electric-winch operated, telescoping tower rises to 100 inches above top of message board sign
Maximum camera height20 ft.

Cellular router:
High-speed ConnectPortTM 3G cellular router with two serial ports, four Ethernet switch ports, air support, EvDO

Cellular signal amplifier:
Dual-band, 3 watt, FCC and IC approved

Video server:
PTZ camera control with multi-level password protection, IP address filtering, HTTPS encryption, IEEE 802.1x authentication

Device server:
Industrial serial device server, 2-port, serial-to-Ethernet conversion

Optional components:
Approach-only, K-band radar speed detector
GPS location

Local control console:
Easy-to-use user interface, NTCIP-compliant software, password-protected access, low-voltage disconnect protection

MPEG video and PTZ camera control using Axis Video via Internet browser

Status monitoring:
Camera power control and monitoring and real-time radar capture using LVD SCADA

Approach-only radar can be displayed on Portable Work Zone software, providing approximate speed of traffic

GPS data access using Virtual Port or GPS software with TCP/IP

>>Back to product page